Chip 2005 March

home *** CD-ROM | disk | FTP | other *** search

/ Chip 2005 March / CMCD0305.ISO / Software / Shareware / Utilitare / emu / Emu8086_Setup_307c.exe / {app} / Translation / _lang.dat < prev next >

Wrap

Text File | 2003-10-08 | 189KB | 4,605 lines

[---START MESSAGES---] >>> Unsigned compare Below Not Below Above Not Above Signed compare Less Not Less Greater Not Greater Equal Not Equal Negative Positive Overflow No Overflow Even Parity Odd Parity Auxiliary Carry No Auxiliary Carry Hardware Interrupts Disabled Hardware Interrupts Enabled Forward Direction Backward Direction Not enough instructions, cannot generate machine code! unsupported video mode: Currently number of disassembled bytes is limited to 1K at a time! Negative number of bytes to disassemble? Bin file not found: Too many sectors! Maximum: 255 use several bin files. No drive number create new drive first! File will be temporary loaded at address 0100:0000h and then written to floppy. Proceed? Proceed? Error writing to floppy! 1 sector written successfully! sectors written successfully! Error writing to floppy: Value out of byte range: Error evaluating expression! No code to compile! Cannot generate COM file : stack segment present. Add "#MAKE_EXE#". -= COM built successfully =- COM file NOT built -= BIN file built successfully =- BIN file NOT built Line "ORG 7C00H" - not found in the begining of the file! Generally a .BOOT program (boot sector) is loaded at address 0000:7C00h. Continue anyway? -= BOOT file built successfully =- BOOT file NOT built file NOT built, there are errors! Compiler error: Please inform the author about this: info@emu8086.com (right click to copy to clipboard) COM file NOT built, aborted - "ORG 100H" not found! Line "ORG 100H" - not found in the begining of the file! Generally a .COM program begins with 100H byte prefix. Error loading: Error on loading: Error saving: No such line! Not found! Error saving to: Set correct output directory from "Compile" menu. Error building EXE: Error building COM: Error building BIN/BOOT: Maximum floppy drive number reached (4)! Error making new Floppy Drive! Floppy Drive: created. Error making new Floppy Drive: PROGRAM TERMINATED! System halted! EXECUTABLE DOESN'T EXIST! FILE TOO SMALL - NOT EXE EXE SIGNATURE NOT FOUND! File too big, only first 400KB loaded. BINARY EXECUTABLE DOESN'T EXIST! File too big, only first 40KB loaded. In case it's a floppy image, it will load itself in a boot process. Unknown byte: See "Complete 8086 instruction set" in documentation. Instruction not available in unregistered version: Error on single step: Please inform the author about this: info@emu8086.com There was an error writing boot sector! Error while trying to disassemble: Break point encountered at: Emulator does not support blinking yet. Wrong parameter in BL! not supported by emulator yet, see "List of supported interrupts" in "emu8086 reference" Program requested reboot! Execution stopped. string has no $ at the end, or out of memory This interupt is not supported yet, not found! Error on preparing emulator: Custom memory map loaded! Cannot find: Cannot find FLOPPY_0 file! not supported yet! See "I/O ports" in "emu8086 reference". Unknown extension: Click 'Yes' to load in Source Editor, or 'No' to load in emulator Reload with command line parameters? Reload: Already registered! Thank you! Cannot find: Click [OK] to locate it, or click [Cancel] to use current register values. Missing .binf file Can not load in this memory area! Free memory area is between 0050:0000h and 0A000:0000h File will be loaded at 0100:0000h Are you sure you want to overwrite any previous boot sector? Program terminated. Reload: File not found: Cannot open HTML file, make sure program that reads HTML files is installed on your system. Please re-install the software pack, see Internet address in about box. Path not found: Are you sure you want to disable re-Disassemble feature? Disabling it may result in wrong disassembling! Are you sure? Defaults will be loaded on next start of the program! This will also reset the 'Macro' menu! Cannot set the same back and fore color! Defaults set! Please note: this changes default color only! it will be affected only if other color is not set via code directly. Please select control name in the list! Cannot set the same fore and back color! Thank you! Registration successful! Thank you! Sorry, the key you entered looks like your OrderID or User ID, but not your your license code! Please check your e-mail for the license code (you may get 2 separate e-mail messages) Thank you. Sorry, please check your User Name and Registration Key. Wrong output directory! Line "ORG 100H" - found! Generally only .COM programs begin with a 100H byte prefix. EXE file NOT built, aborted - "ORG 100H" found! Line "ORG 7C00H" - found! Generally only .BIN programs (boot sectors) begin with a 7C00H byte prefix. Continue anyway? EXE file NOT built, aborted - "ORG 7C00H" found! Save changes to file Save changes? Operands do not match: 8 bit and 16 bit Register!!!! 16 bit and 8 bit Register 16 bit Register and 8 bit Effective Address 8 bit Effective Address and 16 bit Register 8 bit Register and 16 bit Effective Address (add 'b.' before EA) 16 bit Effective Address and 8 bit Register (add 'b.' before EA) Second operand is over 8 bits! Cannot use Segment Register with an Immediate Value Segment Registers cannot go together! CS cannot be modified directly (use far JMP or CALL) IP cannot be modified directly (use JMP or CALL) Cannot get value of IP register (use POP after CALL) Wrong use of Segment Register First operand cannot be an Immediate Value Cannot operate between 2 memory locations! First operand is undefined variable(?) Second operand is undefined variable(?), no zero before hex number(?) EQU cannot start with a number. DUP expansion is over 1020 chars! Illegal instruction: or wrong parameters. Overflow! - cannot be evaluated. Duplicate declaration of: not enough operands for Wrong parameters: Should be register or memory location. Only immediate byte or CL can be used as second parameter! not enough operands for XCHG Not valid label: Condition Jump out of range! This may be caused by following errors! Undeclared label: Not valid parameter for: not supported yet. First parameter can be AL or AX only. Second operand cannot be AL or AX! First operand can be AL or AX only! First operand (port) should be 0..255 or DX. Second parameter can be AL or AX only. First operand cannot be AL or AX! Second operand can be AL or AX only! First operand (port) should be 0..255 or DX. not enough operands for MOV Cannot be evaluated (value maybe too big)! Cannot convert word to byte! Text macro expansion exceeds maximum line length in EQU. syntax error! Unterminated string: MACRO name already in use! Wrong directive: Precompiling... Please wait Pass # Stop Run step delay ms: Run until gets to Set break point Set CS:IP to selected position Sorry! Shareware version cannot compile files over 100 lines. Please register. Thank you. Shareware version cannot assemble files over 75 bytes. How many licenses have you ordered? Registration Error! Piracy Fighting System Registered for 1 license Registered for licenses Shareware version! IN/OUT instructions limited to 10 times per session! This is demo shareware version, it cannot be unlocked. Please download full retail version. Would you like to see registration help? Cannot evaluate this expression ! HEX value should start with 0 (zero) digit ! Emu8086 Evaluation This program can be used for evaluation purposes only There are days of free evaluation remaining. There is 1 day of free evaluation remaining. There are 0 days of free evaluation remaining. Register Now ! Try First ! Emu8086 is not free software. You must either register it, or wait 5 seconds. The purchased version does not display this notice. Register Wait seconds Go Emulator Halted! New Open Samples Save Compile Emulate Calculator Convertor Options Help About Emu8086 is shareware. &Buy Now Enter &Registration Code... Use &Evaluation Version [BX] cannot go with [BP] - Wrong addressing! [SI] cannot go with [DI] - Wrong addressing! [---END MESSAGES---] _______________________________________________________________________ [---START FORM---] >>> ALU [START FORM CAPTION] >>> ALU - Arithmetic & Logical Unit [END FORM CAPTION] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frm_mBox [START FORM CAPTION] >>> Message [END FORM CAPTION] txtMessage [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdOK [START PROPERTY] >>> OK [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frm16Color_DIALOG [START FORM CAPTION] >>> Select Color [END FORM CAPTION] cmdCancel [START PROPERTY] >>> Cancel [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdOK [START PROPERTY] >>> OK [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label1 [START PROPERTY] >>> selected: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblSelectedColor [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblCOLOR(15) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblCOLOR(14) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblCOLOR(13) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblCOLOR(12) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblCOLOR(11) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblCOLOR(10) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblCOLOR(9) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblCOLOR(8) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblCOLOR(7) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblCOLOR(6) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblCOLOR(5) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblCOLOR(4) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblCOLOR(3) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblCOLOR(2) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblCOLOR(1) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblCOLOR(0) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmAbout Frame1 [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdRegister [START PROPERTY] >>> Register [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblRegisteredTo [START PROPERTY] >>> This product is registered to: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblUserName [START PROPERTY] >>> Not registered yet... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdOK [START PROPERTY] >>> OK [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] picIcon [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdSysInfo [START PROPERTY] >>> System Info... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label4 [START PROPERTY] >>> e-mail: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label2 [START PROPERTY] >>> homepage: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Line1(1) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblDescription [START PROPERTY] >>> 8086/8088 assembler and emulator [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Line1(0) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblVersion [START PROPERTY] >>> version [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmAutomaticUpdate [START FORM CAPTION] >>> Automatic Update [END FORM CAPTION] cmdLater [START PROPERTY] >>> Later... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdCheckForUpdate [START PROPERTY] >>> Check for an update! [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtURL_MANUAL [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label1 [START PROPERTY] >>> Your version of emu8086 is quite old, please click the button below to check for an update, or copy && paste (Ctrl+C, Ctrl+V) the address in the text box below to your web-browser. [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmChooseOutput [START FORM CAPTION] >>> Choose Output File Type [END FORM CAPTION] cmdOK [START PROPERTY] >>> OK [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] comboOType [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmChooseTemplate [START FORM CAPTION] >>> Choose Template for New File [END FORM CAPTION] cmdCancel [START PROPERTY] >>> Cancel [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdOK [START PROPERTY] >>> OK [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Frame1 [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] option_template(4) [START PROPERTY] >>> Clean [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] option_template(3) [START PROPERTY] >>> BOOT Template [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] option_template(2) [START PROPERTY] >>> BIN Template [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] option_template(1) [START PROPERTY] >>> EXE Template [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] option_template(0) [START PROPERTY] >>> COM Template [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmDat [START FORM CAPTION] >>> 8086/8088 assembler - emulator [END FORM CAPTION] Frame1 [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] picIcon [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label2 [START PROPERTY] >>> Loading.... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label1 [START PROPERTY] >>> 8086/8088 assembler - emulator [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmDebuger [START FORM CAPTION] >>> Form1 [END FORM CAPTION] cmaxActualSource [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuPopUp [START PROPERTY] >>> mnuPopUp [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuCopy [START PROPERTY] >>> Copy [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuCopyAll [START PROPERTY] >>> Copy All [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuFind [START PROPERTY] >>> Find... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuFindNext [START PROPERTY] >>> Find Next [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmDebugLog [START FORM CAPTION] >>> Debug Log [END FORM CAPTION] cmdSaveToFile [START PROPERTY] >>> Save to file... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdClear [START PROPERTY] >>> Clear [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtLog [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmDEVICE_Robot [START FORM CAPTION] >>> Robot on Port 9 [END FORM CAPTION] picLAMP_OFF [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> Lamp [END TOOLTIP] picTools(2) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> Lamp [END TOOLTIP] picTools(1) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> Wall [END TOOLTIP] picTools(0) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> Robot [END TOOLTIP] timer_Do_ROBOT_MOVE [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] pics(8) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] pics(7) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] pics(6) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] pics(5) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] pics(4) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] pics(3) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] pics(2) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] pics(1) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] pics(0) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] timer_COMPLETE_LEFT [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] timer_COMPLETE_RIGHT [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] picStatus [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] picTL [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] timerHide_Positioner [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] shapePOSITIONER [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblMessage [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] popMapUpMenu [START PROPERTY] >>> popMapUpMenu [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuSwitchOffAllLamps [START PROPERTY] >>> Switch Off All Lamps [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuSwitchOnAllLamps [START PROPERTY] >>> Switch On All Lamps [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmDEVICE_StepperMotor [START FORM CAPTION] >>> Stepper Motor on Port 7 [END FORM CAPTION] picROTOR(3) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] picROTOR(2) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] picROTOR(1) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] picROTOR(0) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] picTL [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] picStatus [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmDEVICE_TrafficLights [START FORM CAPTION] >>> Traffic Lights on Port 4 [END FORM CAPTION] picStatus [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] picTL [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmEditVariable [START FORM CAPTION] >>> Edit Variable [END FORM CAPTION] txtValue [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdCancel [START PROPERTY] >>> Cancel [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdOK [START PROPERTY] >>> OK [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label1 [START PROPERTY] >>> Hexadecimal numbers should have 'h' suffix, binary numbers should have 'b' suffix, etc... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmEmulation [START FORM CAPTION] >>> emulator [END FORM CAPTION] txtMemSegment [START PROPERTY] >>> 0000 [END PROPERTY] [START TOOLTIP] >>> Segment [END TOOLTIP] txtDisOffset [START PROPERTY] >>> 0500 [END PROPERTY] [START TOOLTIP] >>> Offset [END TOOLTIP] txtMemOffset [START PROPERTY] >>> 0000 [END PROPERTY] [START TOOLTIP] >>> Offset [END TOOLTIP] txtDisSegment [START PROPERTY] >>> 0000 [END PROPERTY] [START TOOLTIP] >>> Segment [END TOOLTIP] timerINT15_86 [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdReload [START PROPERTY] >>> Reload [END PROPERTY] [START TOOLTIP] >>> Load Executable File to Emulator [END TOOLTIP] timerStartTurboMode [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdStack [START PROPERTY] >>> Stack [END PROPERTY] [START TOOLTIP] >>> Memory at SS:SP from bottom to top [END TOOLTIP] cmdDisassemble [START PROPERTY] >>> Disassemble: [END PROPERTY] [START TOOLTIP] >>> Convert bytes to assembly code [END TOOLTIP] lstDECODED [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdShowActualSource [START PROPERTY] >>> Actual Source [END PROPERTY] [START TOOLTIP] >>> Shows current instruction in original source code [END TOOLTIP] cmdFlags [START PROPERTY] >>> FLAGS [END PROPERTY] [START TOOLTIP] >>> Flag Register [END TOOLTIP] cmdALU [START PROPERTY] >>> ALU [END PROPERTY] [START TOOLTIP] >>> Arithmetic & Logical Unit [END TOOLTIP] chkAutoStep [START PROPERTY] >>> Run [END PROPERTY] [START TOOLTIP] >>> Make [Single Steps] automatically using step delay [END TOOLTIP] cmdDOS [START PROPERTY] >>> User Screen [END PROPERTY] [START TOOLTIP] >>> Emulator Display [END TOOLTIP] cmdShowMemory [START PROPERTY] >>> memory (1K) at: [END PROPERTY] [START TOOLTIP] >>> Show memory. [Offset]: [Hex value] [Decimal value] [ASCII char] [END TOOLTIP] fraRegisters [START PROPERTY] >>> Registers [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtCH [START PROPERTY] >>> 00 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtAL [START PROPERTY] >>> 00 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtAH [START PROPERTY] >>> 00 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtBL [START PROPERTY] >>> 00 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtBH [START PROPERTY] >>> 00 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtCL [START PROPERTY] >>> 00 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtDL [START PROPERTY] >>> 00 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtDH [START PROPERTY] >>> 00 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtES [START PROPERTY] >>> 0000 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtBP [START PROPERTY] >>> 0000 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtDS [START PROPERTY] >>> 0000 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtDI [START PROPERTY] >>> 0000 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtSI [START PROPERTY] >>> 0000 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtSP [START PROPERTY] >>> 0000 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtSS [START PROPERTY] >>> 0000 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtIP [START PROPERTY] >>> 0000 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtCS [START PROPERTY] >>> 0000 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label1(2) [START PROPERTY] >>> CX [END PROPERTY] [START TOOLTIP] >>> Counter [END TOOLTIP] Label1(12) [START PROPERTY] >>> ES [END PROPERTY] [START TOOLTIP] >>> Extended Segment [END TOOLTIP] Label1(10) [START PROPERTY] >>> BP [END PROPERTY] [START TOOLTIP] >>> Base Pointer [END TOOLTIP] Label1(11) [START PROPERTY] >>> DS [END PROPERTY] [START TOOLTIP] >>> Data Segment [END TOOLTIP] Label1(9) [START PROPERTY] >>> DI [END PROPERTY] [START TOOLTIP] >>> Destination Index [END TOOLTIP] Label1(8) [START PROPERTY] >>> SI [END PROPERTY] [START TOOLTIP] >>> Source Index [END TOOLTIP] Label1(7) [START PROPERTY] >>> SP [END PROPERTY] [START TOOLTIP] >>> Stack Pointer [END TOOLTIP] Label1(6) [START PROPERTY] >>> SS [END PROPERTY] [START TOOLTIP] >>> Stack Segment [END TOOLTIP] Label1(5) [START PROPERTY] >>> IP [END PROPERTY] [START TOOLTIP] >>> Instruction Pointer [END TOOLTIP] Label1(4) [START PROPERTY] >>> CS [END PROPERTY] [START TOOLTIP] >>> Code Segment [END TOOLTIP] Label1(3) [START PROPERTY] >>> DX [END PROPERTY] [START TOOLTIP] >>> Data register [END TOOLTIP] Label1(1) [START PROPERTY] >>> BX [END PROPERTY] [START TOOLTIP] >>> Base address [END TOOLTIP] Label3 [START PROPERTY] >>> L [END PROPERTY] [START TOOLTIP] >>> Low Byte [END TOOLTIP] Label2 [START PROPERTY] >>> H [END PROPERTY] [START TOOLTIP] >>> High Byte [END TOOLTIP] Label1(0) [START PROPERTY] >>> AX [END PROPERTY] [START TOOLTIP] >>> Accumulator [END TOOLTIP] lstMemory [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdStep [START PROPERTY] >>> Single Step [END PROPERTY] [START TOOLTIP] >>> Process instruction at CS:IP [END TOOLTIP] cmdLoad [START PROPERTY] >>> Load [END PROPERTY] [START TOOLTIP] >>> Load Executable File to Emulator [END TOOLTIP] timerStep [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] picWaitingForInput [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdStopInput [START PROPERTY] >>> stop [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblWaitingForInput [START PROPERTY] >>> Waiting for Input [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblMemoryCaption [START PROPERTY] >>> Offset: Hex Dec ASCII [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Line1 [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Line2 [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblStepTime [START PROPERTY] >>> step delay ms: 200 [END PROPERTY] [START TOOLTIP] >>> delay for [Run] between single steps [END TOOLTIP] lblDis_semicolumn [START PROPERTY] >>> : [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblMem_semicolumn [START PROPERTY] >>> : [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] popLoad [START PROPERTY] >>> File [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuLoad [START PROPERTY] >>> Load Executable... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuReLoad [START PROPERTY] >>> Reload [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimter71345 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuResetEmulator_and_RAM [START PROPERTY] >>> Reset Emulator and RAM [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDELIMITER_0 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuCommandLineParameters [START PROPERTY] >>> Set command line parameters [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter8981 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuRecent(1) [START PROPERTY] >>> Recent 1 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuRecent(2) [START PROPERTY] >>> Recent 2 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuRecent(3) [START PROPERTY] >>> Recent 3 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuRecent(4) [START PROPERTY] >>> Recent 4 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter6126 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuExit [START PROPERTY] >>> Close Emulator [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuMath [START PROPERTY] >>> Math [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuEvaluator [START PROPERTY] >>> Expression Evaluator [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuCalculator [START PROPERTY] >>> Number Convertor [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDebug [START PROPERTY] >>> Debug [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuSingleStep [START PROPERTY] >>> Single Step [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuStepOver [START PROPERTY] >>> Step Over [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter61234 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuRunUntilSelected [START PROPERTY] >>> Run until gets to (...) [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuRun [START PROPERTY] >>> Run [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuStop [START PROPERTY] >>> Stop Esc [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter3123 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnu_Set_BreakPoint [START PROPERTY] >>> Set break point (...) [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnu_Clear_BreakPoint [START PROPERTY] >>> Clear break point [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuShowBreakPoint [START PROPERTY] >>> Show current break point [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter4235432 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuSelect_lines_at_CS_IP [START PROPERTY] >>> Show current instruction (at CS:IP) [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter734 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnu_set_CS_IP_to_selected [START PROPERTY] >>> Set CS:IP to selected position (????:????) [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuSaveCurrentState [START PROPERTY] >>> Save current emulator state... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuView [START PROPERTY] >>> View [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDebugLog [START PROPERTY] >>> Keep Debug Log [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeters61234 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuExtendedRegisterView [START PROPERTY] >>> Extended Value Viewer [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelim6123 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuStack [START PROPERTY] >>> Stack [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter123 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuVariables [START PROPERTY] >>> Variables [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuExternalMemoryViewer [START PROPERTY] >>> External Memory Viewer [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter6123 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuActualSource [START PROPERTY] >>> Actual Source [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter61123 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuALU [START PROPERTY] >>> Arithmetic && Logical Unit [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter7134 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuFlags [START PROPERTY] >>> Flags [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter634 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuFlagAnalyzer [START PROPERTY] >>> Lexical Flag Analyzer [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter824 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuUserScreen [START PROPERTY] >>> User Screen [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuVirtualDevices [START PROPERTY] >>> Virtual Devices [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuTrafficLights [START PROPERTY] >>> Traffic Lights [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuStepperMotor [START PROPERTY] >>> Stepper Motor [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuRobot [START PROPERTY] >>> Robot [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDrive [START PROPERTY] >>> Virtual Drive [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuBootFromFloppy [START PROPERTY] >>> Boot from Floppy [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuBoot_from_FLOPPY_X(0) [START PROPERTY] >>> FLOPPY_0 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuBoot_from_FLOPPY_X(1) [START PROPERTY] >>> FLOPPY_1 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuBoot_from_FLOPPY_X(2) [START PROPERTY] >>> FLOPPY_2 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuBoot_from_FLOPPY_X(3) [START PROPERTY] >>> FLOPPY_3 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter5312 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuWriteBootRecord [START PROPERTY] >>> Write 512 bytes at 7C00 to Boot Sector [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuWriteBootRecord_FLOPPY_X(0) [START PROPERTY] >>> FLOPPY_0 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuWriteBootRecord_FLOPPY_X(1) [START PROPERTY] >>> FLOPPY_1 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuWriteBootRecord_FLOPPY_X(2) [START PROPERTY] >>> FLOPPY_2 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuWriteBootRecord_FLOPPY_X(3) [START PROPERTY] >>> FLOPPY_3 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuWriteBinFileToFloppy [START PROPERTY] >>> Write '.bin' file to floppy... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimter51 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuMakeEmptyFloppy [START PROPERTY] >>> Create new floppy drive [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuHelp [START PROPERTY] >>> Help [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuHelpTopics [START PROPERTY] >>> Documentation and Tutorials [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter1 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuCheckForUpdate [START PROPERTY] >>> Check for an update... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter2 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuRegister [START PROPERTY] >>> Register... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuAbout [START PROPERTY] >>> About... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmEvaluator [START FORM CAPTION] >>> Expression Evaluator [END FORM CAPTION] frameSignType [START PROPERTY] >>> Treat Hex,Oct,Bin as: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] checkSigned [START PROPERTY] >>> Signed [END PROPERTY] [START TOOLTIP] >>> When checked values with most significant bit=1 are treated as negative [END TOOLTIP] optByte [START PROPERTY] >>> Byte [END PROPERTY] [START TOOLTIP] >>> 8 bits [END TOOLTIP] optWord [START PROPERTY] >>> Word [END PROPERTY] [START TOOLTIP] >>> 16 bits [END TOOLTIP] cmdClear [START PROPERTY] >>> Clear [END PROPERTY] [START TOOLTIP] >>> Clear the evaluation text box [END TOOLTIP] frameResultType [START PROPERTY] >>> Show result as [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] optOct [START PROPERTY] >>> Oct [END PROPERTY] [START TOOLTIP] >>> Octal (base 8) [END TOOLTIP] optBin [START PROPERTY] >>> Bin [END PROPERTY] [START TOOLTIP] >>> Binary (base 2) [END TOOLTIP] optHex [START PROPERTY] >>> Hex [END PROPERTY] [START TOOLTIP] >>> Hexadecimal (base 16) [END TOOLTIP] optDecimal [START PROPERTY] >>> Decimal [END PROPERTY] [START TOOLTIP] >>> Decimal (regular base 10) [END TOOLTIP] timerEvaluator [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtEvaluator [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmExtendedViewer [START FORM CAPTION] >>> Extended Value Viewer [END FORM CAPTION] txtMemSegment [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> Segment [END TOOLTIP] txtMemOffset [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> Offset [END TOOLTIP] comboRegisterName [START PROPERTY] >>> AX BX CX DX CS IP SS SP BP SI DI DS ES MEM: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Frame1 [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Frame3 [START PROPERTY] >>> Decimal 16 bit [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtDEC_16bit_UNS [START PROPERTY] >>> 00000 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtDEC_16bit_SGN [START PROPERTY] >>> -00000 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label10 [START PROPERTY] >>> Unsigned: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label9 [START PROPERTY] >>> Signed: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Frame2 [START PROPERTY] >>> Decimal 8 bit [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtASCII_H [START PROPERTY] >>> A [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtASCII_L [START PROPERTY] >>> A [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtDEC_L_SGN [START PROPERTY] >>> -000 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtDEC_H_SGN [START PROPERTY] >>> -000 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtDEC_L_UNS [START PROPERTY] >>> 000 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtDEC_H_UNS [START PROPERTY] >>> 000 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label11 [START PROPERTY] >>> ASCII: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label6 [START PROPERTY] >>> Signed: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label5 [START PROPERTY] >>> Unsigned: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtOCT_L [START PROPERTY] >>> 000 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtOCT_H [START PROPERTY] >>> 000 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtBIN_L [START PROPERTY] >>> 00000000 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtBIN_H [START PROPERTY] >>> 00000000 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtHEX_H [START PROPERTY] >>> 00 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtHEX_L [START PROPERTY] >>> 00 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label7 [START PROPERTY] >>> OCT: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label4 [START PROPERTY] >>> BIN: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label1 [START PROPERTY] >>> HEX: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label2 [START PROPERTY] >>> H [END PROPERTY] [START TOOLTIP] >>> High Byte [END TOOLTIP] Label3 [START PROPERTY] >>> L [END PROPERTY] [START TOOLTIP] >>> Low Byte [END TOOLTIP] lblMem_semicolumn [START PROPERTY] >>> : [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label8 [START PROPERTY] >>> Watch: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmFlagAnalyzer [START FORM CAPTION] >>> Lexical Flag Analyzer [END FORM CAPTION] txtResults [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmFLAGS [START FORM CAPTION] >>> FLAGS [END FORM CAPTION] fraFlags [START PROPERTY] >>> Flags [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cbCF [START PROPERTY] >>> 0 1 [END PROPERTY] [START TOOLTIP] >>> Carry Flag [END TOOLTIP] cbZF [START PROPERTY] >>> 0 1 [END PROPERTY] [START TOOLTIP] >>> Zero Flag (0-not zero, 1-zero) [END TOOLTIP] cbSF [START PROPERTY] >>> 0 1 [END PROPERTY] [START TOOLTIP] >>> Sign Flag (0-positive, 1-negative) [END TOOLTIP] cbOF [START PROPERTY] >>> 0 1 [END PROPERTY] [START TOOLTIP] >>> Overflow Flag [END TOOLTIP] cbPF [START PROPERTY] >>> 0 1 [END PROPERTY] [START TOOLTIP] >>> Parity Flag (0-odd, 1-even) [END TOOLTIP] cbAF [START PROPERTY] >>> 0 1 [END PROPERTY] [START TOOLTIP] >>> Auxiliary Flag [END TOOLTIP] cbIF [START PROPERTY] >>> 0 1 [END PROPERTY] [START TOOLTIP] >>> Interupt enable Flag [END TOOLTIP] cbDF [START PROPERTY] >>> 0 1 [END PROPERTY] [START TOOLTIP] >>> Direction Flag (0-forward, 1-backward) [END TOOLTIP] lblFLAGS(0) [START PROPERTY] >>> C [END PROPERTY] [START TOOLTIP] >>> Carry Flag [END TOOLTIP] lblFLAGS(1) [START PROPERTY] >>> Z [END PROPERTY] [START TOOLTIP] >>> Zero Flag (0-not zero, 1-zero) [END TOOLTIP] lblFLAGS(2) [START PROPERTY] >>> S [END PROPERTY] [START TOOLTIP] >>> Sign Flag (0-positive, 1-negative) [END TOOLTIP] lblFLAGS(3) [START PROPERTY] >>> O [END PROPERTY] [START TOOLTIP] >>> Overflow Flag [END TOOLTIP] lblFLAGS(4) [START PROPERTY] >>> P [END PROPERTY] [START TOOLTIP] >>> Parity Flag (0-odd, 1-even) [END TOOLTIP] lblFLAGS(5) [START PROPERTY] >>> A [END PROPERTY] [START TOOLTIP] >>> Auxiliary Flag [END TOOLTIP] lblFLAGS(6) [START PROPERTY] >>> I [END PROPERTY] [START TOOLTIP] >>> Interupt enable Flag [END TOOLTIP] lblFLAGS(7) [START PROPERTY] >>> D [END PROPERTY] [START TOOLTIP] >>> Direction Flag (0-forward, 1-backward) [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmHexCalculator [START FORM CAPTION] >>> Number Convertor [END FORM CAPTION] txtASCII_L [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtASCII_H [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Frame2 [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] opt16bit [START PROPERTY] >>> 16 bit [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] opt8bit [START PROPERTY] >>> 8 bit [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtHEX_8bit [START PROPERTY] >>> 0 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtHEX_16bit [START PROPERTY] >>> 0 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblHEX [START PROPERTY] >>> HEX: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Frame1 [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtDecSigned [START PROPERTY] >>> 0 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtDecUnsigned [START PROPERTY] >>> 0 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblDec [START PROPERTY] >>> DEC: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblSignedInt [START PROPERTY] >>> Signed [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label1 [START PROPERTY] >>> Unsigned [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtOCT [START PROPERTY] >>> 0 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtBIN [START PROPERTY] >>> 0000000000000000 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblASCII [START PROPERTY] >>> ASCII Char: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lbOCT [START PROPERTY] >>> OCT: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblBIN [START PROPERTY] >>> BIN: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmInfo [START FORM CAPTION] >>> Compiler Status [END FORM CAPTION] cmdClose [START PROPERTY] >>> Close [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdEmulate [START PROPERTY] >>> Emulate [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdBrowseMyBuild [START PROPERTY] >>> Browse... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] picProgressHolder [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lstStatus [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lstErr_BUFFER [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lstErr [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] timerAnimation [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtCURRENT [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblPASS_NUMBER [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblErrors [START PROPERTY] >>> Compilation Errors: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblCurrentLine [START PROPERTY] >>> Processing: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblStatusInfo [START PROPERTY] >>> Status: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuCopyPopup [START PROPERTY] >>> mnuCopyPopup [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuCopyLine [START PROPERTY] >>> Copy selected line [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuCopyAll [START PROPERTY] >>> CopyAll [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmMacro [START FORM CAPTION] >>> frmMacro [END FORM CAPTION] lstVal [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lstCurrent [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lstParameters [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lstMacro_Locations [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lstMacro_Names [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lstMacros [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label6 [START PROPERTY] >>> p.values: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label5 [START PROPERTY] >>> current macro: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label4 [START PROPERTY] >>> parameters: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label3 [START PROPERTY] >>> Temp: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label2 [START PROPERTY] >>> locations: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label1 [START PROPERTY] >>> names: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmMain [START FORM CAPTION] >>> Assembler/Emulator [END FORM CAPTION] Timer_DelayCommand [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] frameLoading [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label6 [START PROPERTY] >>> Loading... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtInput [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdCompile_and_Emulate [START PROPERTY] >>> Compile and Emulate Me [END PROPERTY] [START TOOLTIP] >>> Compile current source code, make executable and load it in emulator [END TOOLTIP] cmdHelp [START PROPERTY] >>> Documentation and Tutorials [END PROPERTY] [START TOOLTIP] >>> Documentation & Tutorials [END TOOLTIP] Combo_output_type [START PROPERTY] >>> make COM make EXE make BIN make BOOT [END PROPERTY] [START TOOLTIP] >>> Output file type for compiler [END TOOLTIP] cmdAbout [START PROPERTY] >>> About [END PROPERTY] [START TOOLTIP] >>> About Box & Home page URL [END TOOLTIP] txt_EXE_Template [START PROPERTY] >>> TITLE 8086 Code Template (for EXE file) ; AUTHOR emu8086 ; DATE ? ; VERSION 1.00 ; FILE ?.ASM ; 8086 Code Template ; Directive to make EXE output: #MAKE_EXE# DSEG SEGMENT 'DATA' ; TODO: add your data here!!!! DSEG ENDS SSEG SEGMENT STACK 'STACK' DW 100h DUP(?) SSEG ENDS CSEG SEGMENT 'CODE' ;******************************************* START PROC FAR ; Store return address to OS: PUSH DS MOV AX, 0 PUSH AX ; set segment registers: MOV AX, DSEG MOV DS, AX MOV ES, AX ; TODO: add your code here!!!! ; return to operating system: RET START ENDP ;******************************************* CSEG ENDS END START ; set entry point. [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdOptions [START PROPERTY] >>> Options [END PROPERTY] [START TOOLTIP] >>> Font and other settings... [END TOOLTIP] cmdSave [START PROPERTY] >>> Save [END PROPERTY] [START TOOLTIP] >>> Save Source Code [END TOOLTIP] cmdLoad [START PROPERTY] >>> Open [END PROPERTY] [START TOOLTIP] >>> Open Source Code [END TOOLTIP] cmdEmulate [START PROPERTY] >>> Emulator [END PROPERTY] [START TOOLTIP] >>> Open Emulator [END TOOLTIP] lst_Relocation_Table [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lst_Segment_Sizes [START PROPERTY] >>> sseg 0020 STACK cseg 0010 CODE [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lst_EQU [START PROPERTY] >>> con1 hello con2 world rec rec rec2 rec2 bb [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdCompile [START PROPERTY] >>> Compile [END PROPERTY] [START TOOLTIP] >>> Compile the source code and build an executable [END TOOLTIP] lst_Source [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lst_Precompiled [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdNew [START PROPERTY] >>> New [END PROPERTY] [START TOOLTIP] >>> Create new source code file [END TOOLTIP] txt_COM_Template [START PROPERTY] >>> #make_COM# ; COM file is loaded at CS:0100h ORG 100h [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txt_BIN_Template [START PROPERTY] >>> #make_BIN# ; where to load? ; (usually the same values ; should be set to CS:IP) #LOAD_SEGMENT=1234# #LOAD_OFFSET=0000# ; set these values to registers on load: #AX=1234# #BX=0000# #CX=0000# #DX=0000# #DS=0000# #ES=0000# #SI=0000# #DI=0000# #BP=0000# #CS=1234# #IP=0000# #SS=0000# #SP=0000# [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txt_BOOT_Template [START PROPERTY] >>> #make_BOOT# ; Boot record is loaded at 0000:7C00 ORG 7C00h [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Line2 [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Line1 [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label5 [START PROPERTY] >>> lst_EQU [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label3 [START PROPERTY] >>> Segment name - size - class [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuFile [START PROPERTY] >>> File [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuNew [START PROPERTY] >>> New [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuCOMTemplate [START PROPERTY] >>> COM Template [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuEXETemplate [START PROPERTY] >>> EXE Template [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuBINTemplate [START PROPERTY] >>> BIN Template [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuBOOTTemplate [START PROPERTY] >>> BOOT Template [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuCleanTemplate [START PROPERTY] >>> Clean [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelim782 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuSamples [START PROPERTY] >>> Samples [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuSample_ARR(1) [START PROPERTY] >>> Hello World [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuSample_ARR(2) [START PROPERTY] >>> Add / Subtract [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuSample_ARR(3) [START PROPERTY] >>> Calculate SUM [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuSample_ARR(4) [START PROPERTY] >>> Compare Numbers [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuSample_ARR(5) [START PROPERTY] >>> Binary, Hex and Octal Values [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuSample_ARR(6) [START PROPERTY] >>> Traffic Lights [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuSample_ARR(7) [START PROPERTY] >>> Palindrome [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuSample_ARR(8) [START PROPERTY] >>> Advanced I/O [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuSample_ARR(9) [START PROPERTY] >>> Stepper Motor [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuSample_ARR(10) [START PROPERTY] >>> Simple I/O [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuSample_ARR(99) [START PROPERTY] >>> More Samples... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter61234 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuLoad [START PROPERTY] >>> Open... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelim5432643 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuSave [START PROPERTY] >>> Save [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuSaveAs [START PROPERTY] >>> Save As... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter5896 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuPrint [START PROPERTY] >>> Print... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelim1345 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuRecent(1) [START PROPERTY] >>> Recent 1 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuRecent(2) [START PROPERTY] >>> Recent 2 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuRecent(3) [START PROPERTY] >>> Recent 3 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuRecent(4) [START PROPERTY] >>> Recent 4 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter5641 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuExit [START PROPERTY] >>> Exit [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuEdit [START PROPERTY] >>> Edit [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuUndo [START PROPERTY] >>> Undo [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuRedo [START PROPERTY] >>> Redo [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter512 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuCut [START PROPERTY] >>> Cut [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuCopy [START PROPERTY] >>> Copy [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuPaste [START PROPERTY] >>> Paste [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelim5432 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuSelectAll [START PROPERTY] >>> Select All [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimter112 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuFindText [START PROPERTY] >>> Find... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuFindNext [START PROPERTY] >>> Find Next [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuReplace [START PROPERTY] >>> Replace... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelim621 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuGotoLine [START PROPERTY] >>> Go to Line... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter541 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuIndent [START PROPERTY] >>> Indent Tab [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuOutdent [START PROPERTY] >>> Outdent Shift+Tab [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter642 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuAdvanced [START PROPERTY] >>> Advanced [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuShowLineNumbers [START PROPERTY] >>> Show line numbers [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter834 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuTabifySelection [START PROPERTY] >>> Tabify Selection [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuUntabifySelection [START PROPERTY] >>> Untabify Selection [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter1234 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuCommentBlock [START PROPERTY] >>> Comment Block [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuUncommentBlock [START PROPERTY] >>> Uncomment Block [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter7123 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuLowercaseSelection [START PROPERTY] >>> Lowercase selection [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuUppercaseSelection [START PROPERTY] >>> Uppercase selection [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter6178 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDisplayWhitespace [START PROPERTY] >>> Display Whitespace [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuBookmarks [START PROPERTY] >>> Bookmarks [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuToggleBookmark [START PROPERTY] >>> Toggle Bookmark [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter613 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuPrevBookmark [START PROPERTY] >>> Prev Bookmark [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuNextBookmark [START PROPERTY] >>> Next Bookmark [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter135 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuFirstBookmark [START PROPERTY] >>> Jump To First [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuLastBookmark [START PROPERTY] >>> Jump To Last [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter78123 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuClearAllBookmarks [START PROPERTY] >>> Clear All Bookmarks [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuMacro [START PROPERTY] >>> Macro [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuPlayMacro(0) [START PROPERTY] >>> Play Macro 1 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuPlayMacro(1) [START PROPERTY] >>> Play Macro 2 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuPlayMacro(2) [START PROPERTY] >>> Play Macro 3 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuPlayMacro(3) [START PROPERTY] >>> Play Macro 4 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuPlayMacro(4) [START PROPERTY] >>> Play Macro 5 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuPlayMacro(5) [START PROPERTY] >>> Play Macro 6 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuPlayMacro(6) [START PROPERTY] >>> Play Macro 7 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuPlayMacro(7) [START PROPERTY] >>> Play Macro 8 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuPlayMacro(8) [START PROPERTY] >>> Play Macro 9 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuPlayMacro(9) [START PROPERTY] >>> Play Macro 10 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter12651 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuRepeatNextCommand [START PROPERTY] >>> Repeat Next Command... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter6123 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuNewKeystrokeMacro [START PROPERTY] >>> Record new Keystroke Macro [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] popCompile [START PROPERTY] >>> Compile [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuCompile [START PROPERTY] >>> Compile [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuCompileAndEmulate [START PROPERTY] >>> Compile and Load in Emulator [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter623 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuSetOutPutDir [START PROPERTY] >>> Set Output Directory... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] popEmulator [START PROPERTY] >>> Emulator [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuEmulator [START PROPERTY] >>> Show Emulator [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuCompileAndEmulate_2 [START PROPERTY] >>> Compile and Load in Emulator [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuMath [START PROPERTY] >>> Math [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuEvaluator [START PROPERTY] >>> Expression Evaluator [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuCalculator [START PROPERTY] >>> Number Convertor [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuHelp [START PROPERTY] >>> Help [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuHelpTopics [START PROPERTY] >>> Documentation and Tutorials [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelim1 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuCheckForUpdate [START PROPERTY] >>> Check for an update... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuDelimeter2 [START PROPERTY] >>> - [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuRegister [START PROPERTY] >>> Register... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] mnuAbout [START PROPERTY] >>> About... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmMemory [START FORM CAPTION] >>> External Memory Viewer [END FORM CAPTION] txtMemSegment [START PROPERTY] >>> 0050 [END PROPERTY] [START TOOLTIP] >>> Segment [END TOOLTIP] txtMemOffset [START PROPERTY] >>> 0000 [END PROPERTY] [START TOOLTIP] >>> Offset [END TOOLTIP] cmdShowMemory [START PROPERTY] >>> Show memory at: [END PROPERTY] [START TOOLTIP] >>> Show memory. [Offset]: [Hex value] [Decimal value] [ASCII char] [END TOOLTIP] lstMemory [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblSegment [START PROPERTY] >>> segment [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblOffset [START PROPERTY] >>> offset [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblMem_semicolumn [START PROPERTY] >>> : [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblMemoryCaption [START PROPERTY] >>> Segment:Offset: Hex Decimal ASCII [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmOptions [START FORM CAPTION] >>> Options [END FORM CAPTION] cmdClose [START PROPERTY] >>> Close [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] frameLineNumbers [START PROPERTY] >>> Line Numbers [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] comboLineNumberingStyle [START PROPERTY] >>> <none> Binary Octal Decimal Hex [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtStartLineNumberingAt [START PROPERTY] >>> 1 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label4 [START PROPERTY] >>> Start at: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label3 [START PROPERTY] >>> Style: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] picDefault [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] frameTextEditor [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] chkShowLineToolTips [START PROPERTY] >>> Show Line Numbers on thumb Scroll [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] chkKeywordCaseNormalization [START PROPERTY] >>> Keyword Case Normalization [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] frameTabs [START PROPERTY] >>> Tabs [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtTabSize [START PROPERTY] >>> ? [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] chkConvertTabs [START PROPERTY] >>> Convert Tabs to Spaces while typing [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblTabSize [START PROPERTY] >>> Tab size: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] frameKeywords [START PROPERTY] >>> Keywords [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] comboKeywordItem [START PROPERTY] >>> Comments Instructions Line Numbers Numbers Operators PROC/MACRO Strings Registers Segment Reg Directives Text [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] comboKeywordFontStyle [START PROPERTY] >>> Normal Bold Italic Bold + Italic Underline [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] picKeywordBackgroundColor [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] picKeywordForeColor [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblKeywordItem [START PROPERTY] >>> Item: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Line1 [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblKeyFontStyle [START PROPERTY] >>> Font Style: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblKeyBackColor [START PROPERTY] >>> Background Color: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblKeyForeColor [START PROPERTY] >>> Foreground Color: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] comboAutoIndentMode [START PROPERTY] >>> No indentation Indent on PROC As previous line [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] chkConfineCaretToText [START PROPERTY] >>> Confine Caret toText [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Frame1 [START PROPERTY] >>> Fonts and Colors [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] picGeneralBackColor [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] comboObjects [START PROPERTY] >>> Source Editor User Screen Memory List Decoded List [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdSetFont [START PROPERTY] >>> Set Font ... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label6 [START PROPERTY] >>> Background color: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblObjects [START PROPERTY] >>> Control: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label2 [START PROPERTY] >>> Auto-indent mode: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdResetToDefaults [START PROPERTY] >>> Reset [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Frame2 [START PROPERTY] >>> Disassembler [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtBytesToDisassemble [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] chkDisassemble_after_JMP_CALL [START PROPERTY] >>> re-Disassemble after JMP, CALL, RET [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label1 [START PROPERTY] >>> Bytes to Disassemble: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdOk [START PROPERTY] >>> Close [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmPleaseRegister [START FORM CAPTION] >>> Please Register Your Product [END FORM CAPTION] cmdContinue [START PROPERTY] >>> OK... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdRegister [START PROPERTY] >>> Unlock... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdWhy [START PROPERTY] >>> Help [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtR1 [START PROPERTY] >>> Register and receive these additional benefits: * No limit for source files! * MUL, IMUL, DIV, IDIV, CALL, RET, INT, IRET, SHR, XCHG, LOOPE, LOOPNZ, AAM, RCR, JZ, JCXZ, REPZ... and many other instructions will be available! * No limitation for IN/OUT instructions! * No reminder box... Besides all, your registration will encourage us to further develop and improve the product, making possible even more. Registered users get free updates for an unlimited time! The registration fee is $19.95 (USD) (there are huge quantity discounts for organizations). Thank you! [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmRegister [START FORM CAPTION] >>> Register [END FORM CAPTION] txtRegKey [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtUserName [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdRegister [START PROPERTY] >>> Register [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdHow [START PROPERTY] >>> How to Register? [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdLater [START PROPERTY] >>> Later [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblRegKey [START PROPERTY] >>> Registration Key: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblUserName [START PROPERTY] >>> User Name: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmScreen [START FORM CAPTION] >>> user screen [END FORM CAPTION] timerInput [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdClearScreen [START PROPERTY] >>> Clear Screen [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] picSCREEN [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtCommandPrompt [START PROPERTY] >>> CLS [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmSetOutputDir [START FORM CAPTION] >>> Set Output Directory [END FORM CAPTION] cmdOK [START PROPERTY] >>> OK [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdCancel [START PROPERTY] >>> Cancel [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdChooseDir [START PROPERTY] >>> ... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtPath [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] chkUseDefault [START PROPERTY] >>> Use Default "MyBuild" directory. [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmStack [START FORM CAPTION] >>> Stack [END FORM CAPTION] lstStack [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmVars [START FORM CAPTION] >>> Variables [END FORM CAPTION] listVars [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Frame1 [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtElements [START PROPERTY] >>> 1 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] comboSize [START PROPERTY] >>> BYTE WORD [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] comboNumSystem [START PROPERTY] >>> HEX BIN OCT SIGNED UNSIGNED CHAR [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdEdit [START PROPERTY] >>> Edit [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label1 [START PROPERTY] >>> Elements: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label3 [START PROPERTY] >>> Show as: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label2 [START PROPERTY] >>> Size: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmWriteBinToFloppy [START FORM CAPTION] >>> Write '.bin' file to floppy drive [END FORM CAPTION] comboHead [START PROPERTY] >>> 0 1 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] comboSector [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] comboCylinder [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdWrite [START PROPERTY] >>> Write [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdCancel [START PROPERTY] >>> Close [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] comboDriveNumber [START PROPERTY] >>> FLOPPY_0 FLOPPY_1 FLOPPY_2 FLOPPY_3 [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdGetFile [START PROPERTY] >>> ... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] txtPathToBinFile [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label6 [START PROPERTY] >>> Note: each sector has 512 bytes. [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label5 [START PROPERTY] >>> head: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label4 [START PROPERTY] >>> sector: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Line2 [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label3 [START PROPERTY] >>> cylinder: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label2 [START PROPERTY] >>> drive number: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblSectorsInBootFile [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Line1 [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label1 [START PROPERTY] >>> Path to '.bin' file: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmNiceStartUp [START FORM CAPTION] >>> Nice Start Up [END FORM CAPTION] cmdRecent [START PROPERTY] >>> Recent Files [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdTutorials [START PROPERTY] >>> Quick Start Tutor [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdSamples [START PROPERTY] >>> Code Samples [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Frame1 [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdRegister [START PROPERTY] >>> Register [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblUserName [START PROPERTY] >>> Not registered yet... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblRegisteredTo [START PROPERTY] >>> This product is registered to: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdOK [START PROPERTY] >>> Continue... [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblDescription [START PROPERTY] >>> Assembler and 8086/8088 Microprocessor Emulator [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblTitle [START PROPERTY] >>> Application Title [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Line1(0) [START PROPERTY] >>> [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblVersion [START PROPERTY] >>> version [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---] _______________________________________________________________________ [---START FORM---] >>> frmLincenseCheck [START FORM CAPTION] >>> License Validation [END FORM CAPTION] cmdOnline [START PROPERTY] >>> Help [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdCancel [START PROPERTY] >>> Cancel [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdGoToSite [START PROPERTY] >>> Click here to get your verification ID [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblORDER_ID [START PROPERTY] >>> Order ID: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblEmail [START PROPERTY] >>> Your Email Address: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblWebsite [START PROPERTY] >>> Your web site URL (if any) [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] lblCPU [START PROPERTY] >>> CPU ID: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label2 [START PROPERTY] >>> Verification ID: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] cmdOK [START PROPERTY] >>> Finalize Registration [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] Label1 [START PROPERTY] >>> Number of ordered licenses: [END PROPERTY] [START TOOLTIP] >>> [END TOOLTIP] [---END FORM---]